Graphics Install

Before you start

🔎Inspect your plastics, if they are scuffed and scratched or have major damage it may be worth looking at replacing them. Before you start to install a graphics kit your plastics need to be in a reasonable / excellent condition.

To install motorcycle graphics you will need:

  • ✂️ paper knife / scissors;
  • 💨 hair dryer or heat gun;
  • 💦 degreasing agent or alcohol-water mixture;
  • 💳 squeegee (optional);

🧼Wash your hands. It is very important to have clean hands while you are preparing surface and working with motorcycle graphics. Oily / dirty hands will reduce the ability of your bike graphics to adhere.

Preparing surface

Before you start to Install your graphics you have to remove old/OEM decals. You can use a hair dryer or heat gun to warm the old/OEM graphics for easy removal. Clean the surface with de-greasing agent. You do not want to leave any glue residue from the old graphics, oils or dirt. Your plastics should be warm before applying a graphics kit. We recommend you to keep plastics in a room with temperature more than 15°C / 60 ºF for several hours.